TM rubber mountings are designed to provide superior attenuation of medium to high frequency vibration and noise emanating from a wide

KANWAL'S
VIBRATION-SHOCK-NOISE

TURRET RUBBER
MOUNTINGS
STYLE : TM

TM rubber mountings are designed to provide superior attenuation of medium to high frequency vibration and noise emanating from a wide range of motor driven machines particularly axial and centrifugal fans. High re-silence rubber with low dynamic to static stiffness ratio ensures maximum efficiency, good creep performance and long service life.

DESIGN FEATURES

»Moulded in first grade natural
rubber with integral steel base and
upper fixing boss.

»Also available oil & environment
resistant durable Neoprene.

»Manufactured in three sizes, each
available in three rubber compounds
identified by a color spot

»Static deflections of up to 8 mm with
loads from 5 Kg to 400 Kg.

»Optional height adjusters also
available.

TYPICAL APPLICATIONS

»Axial and Centrifugal fans
»Air Handling Units
»Air Conditioning Equipments
»Packaged Air Conditioners
»Floating Floors
»Generators
»Mobile Equipments
»Pumps
»Refrigeration Plants
»Rotary and Multi Cylinder
Compressors

Note : Turret mountings should not be used on machines exhibiting high out of balance forces without restraining bolt.

If bolting is preferred Mountings are furnished with a tapped hole in the center. This enables the equipment to be bolted securely to the mounting.

Mobile Mounting A restraining bolt is required for mobile and marine applications to control inertia forces.
Mobile mounting have the same load deflection characteristics as the stationary Mountings.

No bolting required Mountings may be used without bolting under machines having no lateral or severe vertical motion.

If bolt hole is inaccessible Use set screw threaded up from under side. "H" must exceed maximum mounting deflection.