Google

 
Web


 Amaricar

SALT SPARY (FOG) TESTING CHAMBER

CAPACITY

100   Ltrs
250   Ltrs
450   Ltrs
1000 Ltrs

INTERNAL DIMENSION
(Width x Depth x Loading x Threshold)
500 x 450 x 430 mm
800 x 550 x 520 mm
800 x 645 x 810 mm
1000 x 900 x 1000 mm

SALT SPRAY CABINET FEATURES:

  • Fibre glass reinforced plastic-high quality durable and corrosion resistant finish.

  • Hinging / Lift off Roof made of acrylic sheet safe and easy access to chamber interior.

  • Large capacity Salt Solution Reservior - upto seven days continuous unattended use.

  • Slot Removable Load Support Racks - Large numbers of samples can be placed on the racks or suspended beneath them. (Trays Optional).

  • Peristaltic pumping of salt solution - Salt solution delivered at a constant and precisely metered rate.

  • Digital 3 term precision Temperature controller guarantee accuracy and repeatability of test results.

  • Humidification tower low water and over temperature protection - for safe operation.

  • Designed to meet the salt - Spray, CASS, Industrial Atmosphere as per ASTM, IEC-68, JSS, IS9000 and QM-333.

OPTIONAL ACCESSORIES

MICROPROCESSOR CONTROLLER
Microprocessor controller with Cyclic Programme to run the chamber in automatic cyclic mode.


AIR PURGE FACILITY
This ensures salt fog quickly and safely exhausted from the cabinet prior to opening the roof.


INTERMITTENT OPERATION
This enables the cabinet conditions to be automatically cycled between fogging and no fogging as required by DEF Std 1053 method 36 and DIN Std 50007.


RESETTABLE HOURS COUNTER
A Digital counter providing an indication of the sample exposure time.

AIR COMPRESSOR
Free standing compressor to provide clean, dry, oil-free compressed air.

WATER DE-IONISER
An in-line mains water de-inoiser for the supply of high purity de-inoised water for humidification tower and/or for making up the salt water test solution.

CHART RECORDER
A control panel mounted strip recorder, coupled to a chamber mounted platinum resistance thermometer for continuous recording of the chamber temperature.

INDEPENDENT TEMPERATURE SENSOR
A four wire platinum resistance thermometer mounted in the cabinet chamber and terminating on the control panel. Allows the customer to connect auxilliary temperature recording eqiupment.

ENTRY PORT
A 30mm diameter sealable entry port will be provided at the left or right side of the cabinet to run the cable for connecting the specimen with outside power supply.